Converting from Natural Gas to Propane
1
Remove the grill grate.
3
Flip unit upside down. Remove grease tray. Locate burner castings. Apply pipe dope to the thread of
the propane injector jet, being careful of not getting any dope into or near the end of the injector.
3
Install oriface with a 6mm nut driver. Push threaded casting end up through hole in burner pan.
Tighten burner retention nuts (A) and
4
replace burners back in original position.
Lift each burner off and locate burner
2
retention nuts(A). Remove nuts and burn-
ers will drop down into holes .
5
5
A
www.newageproducts.com
Install grate back in original position.
A
11