Festool UCR 1000 Notice De Montage page 7

1 Intended use
The Universalcenter (UCR 1000) and the Multi­
functional Stool (MFH 1000) are intended for
use in enclosed rooms in non-residential areas.
Together with the Workcenter (WCR 1000), the
Universalcenter can be used like a mobile
workshop trolley and is used to set down, store
and transport tools and consumables.
Together with the seat cushion (MFH-SK), the
Multifunctional Stool can be used as a mobile
stool.
For safety reasons, unauthorised
changes and/or modifications to the
product are not permitted.
The user is liable for improper or non-in­
tended use.
2 Symbols
Warning of general danger
Read the manual/instructions
Climbing prohibited
3 Safety instructions
Warning! Read and observe all informa­
tion and safety instructions.Failure to adhere
to the warnings and instructions may cause se­
rious injuries.
Keep all safety information and other instruc­
tions in a safe place for future reference.
– This device can be used by persons with re­
duced physical, sensory or mental abilities
or those who lack experience or knowl­
edge, if they are supervised or have been
instructed on safe use of the device and un­
derstand the resulting dangers. Children
should always be supervised to ensure that
they do not play with the machine.
Do not use the device on inclined or un­
–
even subsurfaces. Otherwise, the device
may tip over or roll away and cause acci­
dents and material damage.
– Only use the device on a clean, smooth and
load-bearing subsurface. Sharp-edged or
pointed foreign objects and fibres (e.g. of
cleaning cloths) may damage the castors or
become lodged in the castors. Check the
castors for any foreign objects that may
have become lodged before you roll the de­
vice away or use it at another location.
– Do not overload the device, and do not
misuse it as a ladder or scaffold. Observe
the permissible maximum weight (Fig.: [2]
+ [3]). Overloading or standing on the de­
vice may cause accidents. When using the
storage option of the trolley for objects
which cannot guarantee an even distribu­
tion of the force due to their contour, it is
imperative you use a plate of corresponding
material that is adequately stable as an ad­
ditional base.
4 Assembly
Assembly
Main body
Assembly of MFH 1000
Assembly of UCR 1000
The 35000318 base plate is also re­
quired for the retrofitting of an exist­
ing Workcenter WCR 1000 with serial
number lower than 10102312.
5 Environment
Do not dispose of the tool in the house­
hold waste!Recycle tools, accessories
and packaging. Observe applicable na­
tional regulations.
EU only: In accordance with European Directive
2002/96/EC on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
Information on REACh: www.festool.com/reach
English
Figure
7