Festool UCR 1000 Notice De Montage page 14

Dansk
1 Intended use
The Universalcenter (UCR 1000) and the Multi­
functional Stool (MFH 1000) are intended for
use in enclosed rooms in non-residential areas.
Together with the Workcenter (WCR 1000), the
Universalcenter can be used like a mobile
workshop trolley and is used to set down, store
and transport tools and consumables.
Together with the seat cushion (MFH-SK), the
Multifunctional Stool can be used as a mobile
stool.
For safety reasons, unauthorised chan­
ges and/or modifications to the product
are not permitted.
The user is liable for improper or non-in­
tended use.
2 Symbols
Warning of general danger
Read the manual/instructions
Climbing prohibited
3 Safety instructions
Warning! Read and observe all informati­
on and safety instructions.Failure to adhere to
the warnings and instructions may cause serio­
us injuries.
Keep all safety information and other instruc­
tions in a safe place for future reference.
– This device can be used by persons with re­
duced physical, sensory or mental abilities
or those who lack experience or knowled­
ge, if they are supervised or have been in­
structed on safe use of the device and un­
derstand the resulting dangers. Children
should always be supervised to ensure that
they do not play with the machine.
Do not use the device on inclined or une­
–
ven subsurfaces. Otherwise, the device
may tip over or roll away and cause acci­
dents and material damage.
– Only use the device on a clean, smooth and
load-bearing subsurface. Sharp-edged or
pointed foreign objects and fibres (e.g. of
cleaning cloths) may damage the castors or
become lodged in the castors. Check the
castors for any foreign objects that may ha­
14
ve become lodged before you roll the devi­
ce away or use it at another location.
– Do not overload the device, and do not
misuse it as a ladder or scaffold. Observe
the permissible maximum weight (Fig.: [2]
+ [3]). Overloading or standing on the devi­
ce may cause accidents. When using the
storage option of the trolley for objects
which cannot guarantee an even distributi­
on of the force due to their contour, it is im­
perative you use a plate of corresponding
material that is adequately stable as an ad­
ditional base.
4 Assembly
Assembly
Main body
Assembly of MFH 1000
Assembly of UCR 1000
The 35000318 base plate is also re­
quired for the retrofitting of an exi­
sting Workcenter WCR 1000 with seri­
al number lower than 10102312.
5 Miljø
Apparatet må ikke bortskaffes med al­
mindeligt husholdningsaffald!Appara­
ter, tilbehør og emballage skal bortskaf­
fes miljømæssigt korrekt på en kommunal gen­
brugsstation. Gældende nationale forskrifter
skal overholdes.
Kun EU: Ifølge Rådets direktiv om affald af
elektrisk og elektronisk udstyr og gennemfø­
relse til national ret skal gammelt el-værktøj
indsamles separat og afleveres til miljøvenlig
genvinding.
Informationer om REACh: www.festool.com/
reach
Figure