BOMANN CL 6044 QC CB Mode D'emploi page 155

Transportation, marking and storage for units that em-
ploy flammable refrigerants
Transport of equipment containing flammable refrigerants
Attention is drawn to the fact that additional transportation regulations may
exist with respect to equipment containing flammable gas. The maximum
number of pieces of equipment or the configuration of the equipment,
permitted to be transported together will be determined by the applicable
transport regulations.
Marking of equipment using signs
Signs for similar appliances used in a work area generally are addressed
by local regulations and give the minimum requirements for the provision
of safety and / or health signs for a work location.
All required signs are to be maintained and employers should ensure that
employees receive suitable and sufficient instruction and training on the
meaning of appropriate safety signs and the actions that need to be taken
in connection with these signs.
The effectiveness of signs should not be diminished by too many signs
being placed together.
Any pictograms used should be as simple as possible and contain only
essential details.
Disposal of equipment using flammable refrigerants
See national regulations.
Storage of equipment / appliances
The storage of equipment should be in accordance with the manufactur-
er's instructions.
Storage of packed (unsold) equipment storage package protection should
be constructed such that mechanical damage to the equipment inside the
package will not cause a leak of the refrigerant charge.
The maximum number of pieces of equipment permitted to be stored
together will be determined by local regulations.
9
Service-Anleitung 07.01.2021