EN
Read the safety instructions before starting the installation.
DE
Lesen Sie die Sicherheitshinweise, bevor Sie mit der Installation beginnen.
FR
Lisez les instructions de sécurité avant de commencer l'installation.
Accessories
Double sided adhesive tape / Doppelseitiges klebeband / Ruban adhésif double face
Compatibility check
Before you start mounting the backplate,
compare your board with the pictures in the
manual. It can happen that mainboard
manufacturers slightly change the design
through revisions and the backplate no longer
fits on later models. When mounting the
backplate, make sure that high components
are exposed and that the backplate does not
damage the mainboard.
Alphacool International GmbH is not liable
for assembly errors occurring due to
negligence, such as selecting an
incompatible cooler.
Preparing the backplate
Place the hardware on an antistatic surface.
Extreme care must be taken with delicate
components. Make sure that a CPU is mounted
in the socket or that the cover plate of the CPU
socket is mounted. Then clean the hardware of
dust and impurities with a solvent (e.g.
isopropanol alcohol).
Core Backplate XPX/Eisbaer
Zubehör
Kompatibilität Prüfen
Bevor Sie mit der Montage der Backplate
beginnen, vergleichen Sie Ihre Platine mit den
Bildern der Anleitung. Es kommt vor, dass
Mainboard- Hersteller über Revisionen den
Aufbau leicht abändern und die Backplate auf
spätere Modelle nicht mehr passt. Achten Sie
auch bei der Montage darauf, dass hohe
Bauteile frei liegen und die Backplate das
Mainboard nicht beschädigt.
Alphacool International GmbH haftet nicht
bei fahrlässigen Montagefehlern, wie die
Wahl eines inkompatiblen Kühlers.
Vorbereiten der Backplate
Legen Sie die Hardware auf eine antistatische
Unterlage. Es ist äußerste Sorgfalt geboten.
Es können leicht Bauteile abgerissen werden.
Achten sie darauf, dass eine CPU im Sockel
montiert
oder die Abdeckplatte des CPU-
Sockel montiert sein muss. Reinigen Sie
anschließend die Hardware von Staub und
Verunreinigungen mit einem Lösemittel (z.B.
Isopropanol-Alkohol).
Alphacool
LGA 115X/1200/1700 METAL
Safety instruction
Sicherheitshinweis
Avis de sécurité
Accessoires
Vérification de compatibilitè
Avant de commencer le montage de la plaque
arrière, comparez votre platine avec les
images du mode d'emploi. Il arrive que les
fabricants
de
cartes
mères
légèrement la structure lors des révisions et
que la plaque arrière ne soit plus adaptée aux
modèles ultérieurs. Lors du montage, veillez
également à ce que les composants hauts
soient dégagés et que la plaque arrière
n'endommage pas la carte mère.
Alphacool International GmbH n'est
responsable ni des erreurs d'installation ni
du choix d'un refroidisseur incompatible.
Préparer la plaque arrière
Placez
le
matériel
sur
antistatique. Il faut faire très attention. Les
composants
peuvent
facilement
arrachés. Veillez à ce qu'une unité centrale
soit montée dans le socle ou que la plaque de
recouvrement du socle de l'unité centrale soit
montée. Nettoyez ensuite le matériel de la
poussière et des impuretés avec un solvant
(par exemple de l'alcool isopropylique).
modifient
une
surface
être