Publicité
Les langues disponibles
Les langues disponibles
GB
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5. Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer or it's
service agent or a similarly qualified person in order to avoid a safety hazard.
Safety Instructions for Spray Guns
Attention! Danger of injection
Spray materials emerge from nozzle tips under high pressure.
Never point the spray stream towards human beings or animals.
•
Do not use the spray guns to spray flammable substances.
•
The spray guns are not to be cleaned with flammable solvents.
•
The spray gun is not to be used in work places covered by Ex-protection regulations.
•
To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
•
No sources of ignition are to be in the immediate area when spraying, e.g. open flame,
cigarettes, sparks, glowing wires and hot surfaces.
•
Before carrying out any work on the spray gun, unplug the lead from the power socket.
•
Take precautionary measures against potential hazards from the spray liquid and follow
any instructions given on containers or laid down by the manufacturer of the liquid.
•
Do not spray any liquid of unknown hazard potential.
•
Wear a breathing mask and ear protection.
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.
Max. delivery rate:
Max. viscosity:
Max. pressure spikes: 120 bar
Power source:
Power consumption: 110 W
12
Technical Data
140 g/min
(runout time) 60 sec. Double insulation:
230 V, 50 hz
Container capacity: 600 ml
Pump:
Pump cylinder:
Piston:
W 95
Replaceable
Special steel
special steel Ø 5 mm
Publicité
