Publicité
Les langues disponibles
Les langues disponibles
8836371
3.
Do not allow people, mobile equipment or vehicles to pass
over the unprotected air hose. Position the air hose away
from high traffic areas, in a reinforced conduit or place planks
on both sides of the air hose to create a protective trench.
4.
Prevent damage to the air hose by observing the following:
4.1 Keep the air hose behind the tool and out of the tool's
work path.
4.2 Keep the air hose away from heat, oil, sharp edges or
moving parts.
4.3 Do not wrap the air hose around the tool as sharp
edges may pierce or crack the air hose. Coil the air
hose when storing.
5.
A damaged or disconnected air hose under pressure may
whip around and inflict personal injury or damage the work
area. Secure the compressor's air hose to a fixed or
permanent structure with clamps or cable ties.
6.
Install an in-line shutoff valve or regulator to allow
immediate control over the air supply in an emergency,
even if a hose is ruptured.
7.
Check the manufacturer's maximum pressure rating for air
tools and accessories. Compressor outlet pressure must be
regulated so as to never exceed the maximum pressure
rating of the tool.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and
inspect for damage. Make sure that all items in the parts list
are included.
8
50 Ton Pneumatic/Hydraulic Shop Press
For technical questions call 1-800-665-8685
V1.0
Publicité
