PRO-POINT 8836371 Manuel D'utilisateur page 2

8836371
50 TON PNEUMATIC/HYDRAULIC
SHOP PRESS
SPECIFICATIONS
Press Capacity
Press Type
Working Size
Working Load
Bed/Base Size
Ram Travel
Cylinder Type
Required Air Pressure
INTRODUCTION
The 50 Ton Pneumatic/Hydraulic Shop Press is equipped to allow
compressed air to power the hydraulic ram. Hook up the air valve
to your existing compressed air system in the shop and it is ready
to go. A foot pedal control allows hands-free operation.
SAFETY
WARNING! Read and understand all instructions before using
this tool. The operator must follow basic precautions to reduce
the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this
manual. A notice is an alert that there is a possibility of property
damage, injury or death if certain instructions are not followed.
2
50 Ton Pneumatic/Hydraulic Shop Press
For technical questions call 1-800-665-8685
50 tons
Pnuematic and hydraulic
6-1/4 to 33-13/16 in.
110,231 lb
32-1/2 in.
7-1/2 in.
Push
110 to 120 PSI
V1.0