Publicité
Les langues disponibles
Les langues disponibles
V1.0
3.
Inspect the press before each use. Do not use if any
component is bent, broken, cracked, leaking or showing
other damage. Do not use the press after a shock load until
a qualified technician has examined the press.
4. Check to ensure that all bolts and nuts are tight.
5.
Only use this shop press on a surface that is stable, level
and not slippery. The surface must be capable of sustaining
the weight of the shop press and the load.
6.
Ensure that the workpiece is center-loaded and secure. An
unbalanced load may slip off the heel blocks or bed frame.
7.
Keep hands and feet away from the bed area at all times.
8.
Do not use the shop press to compress a spring or any
other item that could disengage and cause a potential
hazard. Never stand directly in front of a loaded press and
never leave a loaded press unattended.
9.
Do not allow an untrained person to operate the press.
10. Do not use brake fluid or other improper fluid in place of
hydraulic oil. Avoid mixing different types of oil when
adding hydraulic oil. Only good quality hydraulic jack oil
can be used.
11. Do not expose the press to rain, snow or inclement
weather.
12. Bolt the press to the floor if it is to be used on bulky or
unstable items.
HYDRAULIC SAFETY
DANGER! Seek immediate medical attention if hydraulic fluid
under pressure penetrates your skin. See Injection Injury
precautions for instructions before using a pressurized
hydraulic system.
1.
Do not touch or handle hydraulic hoses or components
while under pressure. Hydraulic fluid escaping under
Visit www.princessauto.com for more information
50 Ton Pneumatic/Hydraulic Shop Press
8836371
5
Publicité
