Publicité
Les langues disponibles
Les langues disponibles
8836371
3.
Wear gloves that provide protection based on the work
materials or to reduce the effects of tool vibration.
3.1 Do not wear gloves when operating a tool that can snag
the material and pull the hand into the tool.
4.
Wear protective clothing designed for the work environment
and tool.
5.
Non-skid footwear is recommended to maintain footing and
balance in the work environment.
6.
Wear steel toe footwear or steel toe caps to prevent a foot
injury from falling objects.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment
to avoid personal injury or damage to the tool.
1.
Do not operate any tool when tired or under the influence of
drugs, alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become
entangled with the moving parts of a tool. Keep long hair
covered or bound.
3.
Do not overreach when operating the tool. Proper footing
and balance enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence to the tool
safety rules. If you use this tool unsafely or incorrectly, you can
suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for
an unintended purpose.
2.
The maximum load is 50 tons. Do not exceed this rated
capacity. Never apply excessive force to a workpiece and
always use the pressure gauge to accurately determine the
applied load.
4
50 Ton Pneumatic/Hydraulic Shop Press
For technical questions call 1-800-665-8685
V1.0
Publicité
