Appendix; Specifications - Webasto TurboDX Guide D'installation

Borne de recharge pour véhicules électriques
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

APPENDIX

SPECIFICATIONS

Model
EVSE-DX
Line input power:
208/240 VAC
16 amps continuous @ 240/208 VAC
Output power:
32 amps continuous @ 240/208 VAC
20 amps @ 240/208 VAC
Circuit breaker rating:
40 amps @ 240/208 VAC
Frequency:
50/60 Hz
Power draw at idle:
< 2 watts
Power draw during charging:
< 4 watts
Cable length:
approximately 12ft (3.7m) - 25ft (7.6m )
Weight:
SAE
7.6 kg (16.75 lb.)
Temperature –
-40°C to +55°C (-40°F to +131°F)
operating:
Temperature –
storing and transporting:
-40°C to +80°C (-40° F to +176° F)
Environmental rating:
IP66 (watertight)
Vehicle – charger communication
SAE J1772
protocol:
Direction of charge:
Grid to vehicle
Specifications are subject to change without notice.
17

Publicité

Chapitres

Table des Matières
loading

Table des Matières