Publicité
Les langues disponibles
Les langues disponibles
disinfecting agent. Use an har bristle brush
or any other tool previously sanitized in
order to facilitate the operation. Leave the
disinfecting agent for the time required (no
less than 5 minutes).
•Pull out the scrapers (18), (19) and (21)
(simply by pulling them), the interlocking
buffers (20) (by pushing them out from the
blade) and the bush (17) from the paddle.
•Separate the ORs gaskets from the bush
(17), and from the ring (4).
•By unscrewing the aprropriate screw (14)
remove the chute (11).
•By unscrewing the aprropriate screws (12)
remove the frame (8) with the grid and his
basket.
•Remove the grid (9) and, by unscrewing the
appropriate screws (13), remove the
extrusion flange (24) and pull out the small
grid (25). Separate the gasket (16) and the
other sealing gasket from the flange (24).
•Fill 2 separated baskets with sanitizing
solution and fully immerse in the first basket
for the time required by the disinfecting
agent (no less than 5 minutes) the paddle
(5), the inserts (18), (19) and (21), the
interlocking buffers (20), the gate (9), the
ring (4), the flange (24), the small grid (25)
the spoon (23), the lid (3), the lid cap (3a)
and his rubber small cap and all the ORs
gaskets and the screws (13), (14) and (12).
•By using an hard bristle brush or any other
appropriate tool, carefully clean the body
and the recessed and/or hidden areas of
the paddle (5). Pay utmost attention in
cleaning the internal sleeve, the blades and
the zone around the interlocking buffers
(20). Leave it fully immersed in the second
basket with the solution prepared above for
the time required (no less than 5 minutes).
•By using an hard bristle brush or any other
appropriate tool, carefully clean the body
and the recessed and/or hidden areas of
the bush (17). Pay utmost attention in
cleaning the ORs gaskets throats. Leave it
fully immersed in the second basket with
the solution prepared above for the time
required (no less than 5 minutes).
•By using an hard bristle brush or any other
appropriate tool, carefully clean the body
English
and the recessed and hidden areas of the
retainer (4). Pay utmost attention in cleaning
the OR throat and the thread. Leave it fully
immersed in the second basket with the
solution prepared above for the time
required (no less than 5 minutes).
•By using an hard bristle brush or any other
appropriate tool, carefully clean the body
and the recessed and/or hidden areas of
the inserts (18), (19) and (21) especially the
zones where the metal blade of the paddle
gets stuck. Repeat the operation twice.
Fully immerse the goods each time into an
unused disinfecting agent solution. Leave
them all fully immersed in the second
basket with the solution prepared above for
the time required (no less than 5 minutes).
•By using an hard bristle brush or any other
appropriate tool, carefully clean the chute
(11) and his recessed and/or hidden areas.
Leave it fully immersed in the second
basket with the solution prepared above for
the time required (no less than 5 minutes).
•By using an hard bristle brush or any other
appropriate tool, carefully clean the frame
(8), the grid and the basket and their
recessed and/or hidden areas. Leave them
all fully immersed in the second basket with
the solution prepared above for the time
required (no less than 5 minutes).
•By using an hard bristle brush or any other
appropriate tool, carefully clean the
extrusion flange (24) and the small grid (25)
and his recessed and/or hidden areas. Pay
attention in particular to the gaskets sites
and to the rails where the gate (9) gets
stuck. Leave them all fully immersed in the
second basket with the solution prepared
above for the time required (no less than 5
minutes).
•By using the wet cloth previously immersed
in the sanitizing solution, carefully clean all
the ORs gaskets, the interlocking buffers
(20), the gate (9), the screws (12), (14) and
(13), the lid (3), the lid cap (3a) and the
silicon cap. Leave them all fully immersed in
the second basket with the solution
prepared above for the time required (no
less than 5 minutes).
•By using the wet cloth previously immersed
11
Publicité
