KTM 63712964088 Instructions page 25

Right-hand side
–
Remove screws
–
Take off the cover.
–
Remove the throttle grip.
501917-01
–
Position heated grip, right
Holding lug
–
Route the cable in the accelerator position sensor without
tension (as shown) and secure with a cable tie if necessary.
501918-01
–
Position the cover.
–
Mount and tighten screws
Guideline
Cover, throttle grip
Info
Make sure that the cable is not bent or pinched.
501922-01
Assembling
–
Position hand guards with handlebar weight.
–
Tighten screw
Guideline
Screw, hand guard
501931-01
Alternative
–
Position hand guards with handlebar weight.
–
Tighten screw
Guideline
Screw, hand guard
502379-01
9
.
1
(included) on the handlebar.
A B
engages in recess .
9
.
M5 5 Nm (3.7 lbf ft)
5
.
M8 12 Nm (8.9 lbf ft)
5
.
M8 12 Nm (8.9 lbf ft)
ASSEMBLY 5
9