Pari eFlow rapid Notice D'utilisation page 48

• Insert the aerosol head (3) into the
openings on the medication reservoir.
It must snap noticeably into place.
NOTE:
Do not touch the membrane (the curved
metal surface in the middle of the aerosol
head) to avoid damage.
60
• Insert the inspiratory valve (6) in the
aerosol chamber.
When doing so, check that the two valve
flaps are seated correctly.
44
3
They must lie perfectly flush and face
towards the aerosol chamber following
insertion.
6
• Close the aerosol chamber.
NOTE:
If the snap closure does not close,
ensure that the inspiratory valve is
seated correctly. It must lie flat against
the aerosol chamber.
• Attach the mouthpiece (7) to the aerosol
chamber.
Info:
For inhalation with a mask, follow the
instructions for use of the mask you
are using.
7
®
eFlow rapid - 2021-04