Pari eFlow rapid Notice D'utilisation page 46

PREPARING FOR INHALATION
3
Information for the first
application
- Wash your hands thoroughly every time
before using the nebuliser system.
- To avoid irritation of the airways due to
inhaling aerosol when it is too cold and
impairment of the aerosol properties, do
not use medications straight from the
refrigerator.
- Clean the nebuliser handset and aero-
sol head before the first application (see
"CLEANING AND DISINFECTION",
page 50).
Preparing the controller
The controller can be operated with the
delivered batteries or with commercially
available rechargeable batteries.
Info:
Rechargeable batteries cannot be
recharged in the controller!
• Open the battery compartment by lifting
the clip.
42
• Insert the batteries as indicated by the
polarity symbols.
• Close the battery compartment. The
controller is ready for use when the bat-
teries have been inserted.
Mains power
Check that the power adapter is intact
before every application.
WARNING:
Do not use a power adapter that is
damaged or faulty.
®
The eBase Controller was developed for
mobile use. Therefore, insert batteries
before use and leave them in the control-
ler during mains operation. This guaran-
tees smooth functionality. This does not
deplete the energy reserves of the
batteries.
®
eFlow rapid - 2021-04