Airzone EASYZONE AZCE6LITECB Guide D'installation Rapide page 42

FLOW REGULATION
Important: Start adjusting the flow from the central dampers and finish off with damper 1.
ES
EN
FR
IT
PT
FLOW ADJUSTMENT (REG)
DE
1. Turn on and generate demand in all zones to open all the dampers.
2. Turn off the zone/damper to be adjusted.
3. Adjust the maximum opening you want with the REG lever (I/II/III/IV)
4. Turn on the zone and check the flow is correct.
MINIMUM AIR SETTING (A-M)
5. Turn on and generate demand in all zones to open all the dampers.
6. Adjust the minimum opening you want with the M-A lever (a/b/c/d)
7. Turn on the zone and check the minimum air flow is correct.
A-M
42
REG