Airzone EASYZONE AZCE6LITECB Guide D'installation Rapide page 38

ES
Remember: Once all the connections are made, make sure you replace the cover properly.
EN
FR
IT
PT
Reset the system
DE
If you want to return to factory values, press and hold SW1
LEDS to go back to their normal state before starting with the initial configuration process.
Changing batteries
To replace the battery, separate the thermostat from its support and
replace the battery (CR2450).
Important: We recommend using of top-brand batteries. Using low-
quality batteries may reduce the duration of use
Remember to deposit the old battery into an appropriate recycling point.
Note: Do not forget to remove the security system before taking away the
thermostat from the wall.
ASSEMBLY AND CONNECTION EVALUATION
Check the following aspects:
- The state of the LEDs of the main control board and the rest of control elements. Check the self-diagnose section.
- Wired and wireless thermostats power supply.
INITIAL CONFIGURATION
BLUEFACE AND THINK THERMOSTATS
Important: Once you start the process, it cannot be interrupted.
Language/Country
Select your language and country. These are the available languages: Spanish, English, French, Italian, German and Portuguese.
To associate a wireless Think thermostat, start the radio channel search:
38
According to the current local and national regulations, it is mandatory to add a switch (or other element
to disconnect the system) to the external supply wiring so that a constant separation between poles is
guaranteed. The system will restart automatically if the supply is eventually turned off. Use an
independent circuit from the controlled system for the power supply.
until LED D19 stops flashing. Wait for the
.