JUMO dTRANS p20 Notice De Mise En Service page 82

13 Homologation DNV GL
82
Product description
Pressure transmitter : dTrans p20, Type 403025 / XXX with stainless steel covers.
Rating : 24VDC, Range 11.5 to 28V DC.
4-20 mA, also with HART option.
Application/Limitation
The Type Approval covers hardware listed under Product description. When the hardware is used in
applications to be classed by DNV GL, documentation for the actual application is to be submitted for
approval by the manufacturer of the application system in each case. Reference is made to DNV GL RU
SHIP Pt. 4 Ch. 9 Sec. 1.
Ex-certification is not covered by this certificate. Application in hazardous area to be approved
case according to the Rules and Ex-Certification/ Special Condition for Safe Use listed in valid
examination certificate SEV 09 ATEX 0138 X
Type Approval documentation
Datasheet : 40302500T10Z001K000, Vers. 3.00
Operating Manual: 40302500T90Z001K000, Vers.3.00
Diagram composition: 40302500C40Z000 dwg. K000, Vers. 10
Test reports: 203951/4, dated 2012-06-13
TA Assessment Report DNV GL Magdeburg, dated 2017-05-15.
Tests carried out
Applicable Tests according to Class Guidleine DNV GL CG-0339, November 2016
Marking of product
Manufacturer name, type designation (403025), serial-number
Periodical assessment
The scope of the periodical assessment is to verify that the conditions stipulated for the type are
complied with, and that no alterations are made to the product design or choice of systems, software
versions, components and/or materials.
The main elements of the assessment are:
Ensure that type approved documentation is available
Inspection of factory samples, selected at random from the production line (where practicable)
Review of production and inspection routines, including test records from product sample tests and
control routines
Ensuring that systems, software versions, components and/or materials used comply with type
approved documents and/or referenced system, software, component and material specifications
Review of possible changes in design of systems, software versions, components, materials and/or
performance, and make sure that such changes do not affect the type approval given
Ensuring traceability between manufacturer's product type marking and the type approval certificate
Periodical assessment is to be performed after 2 years and after 3.5 years. A renewal assessment will be
performed at renewal of this certificate.
END OF CERTIFICATE
Form code: TA 251 Revision: 2016-12
Job Id:
Certificate No: TAA00001KB
issued by a notified/recognized Certification Body.
www.dnvgl.com
262.1-015258-2
in each
EC-type
Page 2 of 2