Bosch GWS 14,4 V Professional Instructions D'emploi page 6

1 609 929 L70 - USA Seite 6 Donnerstag, 12. Juli 2007 2:21 14
Tool Specifications
Angle Grinder
Article number
No-load speed [rpm] 12 500
Grinding wheel dia.,
max. [mm]
Tool holder
Weight according to
EPTA-Procedure
01/2003 [kg]
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
While reading the operating instructions, unfold
the graphics page of the tool and leave it open.
1 Battery
2 Battery unlocking button
3 On/Off switch
4 Auxiliary handle
5 Tool holder, SDS-pro
6 Protection guard
7 Clamping lever
8 Grinding/cutting wheel*
9 Rubber sanding plate*
10 Sanding disc*
11 Centering collar
12 Cam
13 Locking fixtures
14 SDS-pro release button
* Illustrated or described accessories are not included
as standard delivery.
For Your Safety
Working safely with this machine
is possible only when the operat-
ing and safety information is read
completely and the instructions
contained therein are strictly fol-
lowed. Additionally, the general safety instruc-
tions either in the enclosed booklet or those
added in the center of these operating instruc-
tions must be observed. Before using for the
first time, ask for a practical demonstration.
6 | English
GWS 14,4 V
Professional
0 601 934 4..
Wear additional protection equipment for your
safety, such as protective gloves, sturdy
shoes, hard hat and apron.
100
SDS-pro
Before each use, check the machine and bat-
tery. If damage is detected, do not use the ma-
chine. Have repairs performed only by a qualified
2.1 technician. Never open the machine yourself.
Use power tools only with specifically des-
ignated battery packs. Use of any other bat-
tery packs may create a risk of injury and fire.
If used inappropriately, liquid may leak out
of the battery; avoid contact with it. If con-
tact accidentally occurs, flush with water. If
liquid gets into the eyes, also seek medical
help. Liquid that has leaked out of the battery
may irritate or burn the skin.
Remove the battery before performing any
work on the machine itself (e. g. mainte-
nance, tool change, etc.) and during its
transport and storage. Failure to do so may
cause an injury when unintentionally activating
the On/Off switch.
Make sure the switch is in the off position
before inserting the battery pack. Inserting
the battery pack into power tools that have the
switch on invites accidents.
Before using, make sure the battery fits se-
curely inside the machine.
Do not load the machine so heavily that it
comes to a standstill.
When working with the machine, always
mount the auxiliary handle.
When working with the machine, always hold it
firmly with both hands and make sure you are
in a secure standing position.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
The protection guard 6 must be mounted when
working with grinding or cutting wheels.
Don't work with materials containing asbestos.
Use only grinding tools whose allowable speed is
at least as high as the idling speed of the machine.
Check grinding tools before use. The grinding
tool must be properly mounted and turn freely.
Perform a test run for at least 30 seconds with-
out load. Do not use damaged, out-of-round or
vibrating grinding tools.
Wear protective glasses and ear
protection.
1 609 929 L70 • 12.7.07