Publicité
Les langues disponibles
Les langues disponibles
Dishwasher installation steps
1 Install the furniture door to the outer door of the
dishwasher using the brackets provided. Refer
to the template for positioning of the brackets.
2 Adjust the tension of the door springs by using
an Allen key turning in a clockwise motion to
tighten the left and right door springs. Failure to
do this could cause damage to your dishwasher
(Illustration 2).
3 Connect the inlet hose to the cold water supply .
4 Connect the drain hose. Refer to diagram.
(Figure 6)
5 Connect the power cord.
6 Affix the condensation strip under the work
surface of cabinet. Please ensure the
condensation strip is flush with edge of work surface.
7 Place the dishwasher into position.
(Illustration 4)
8 Level the dishwasher. The rear food can be
adjusted from the front of the dishwasher by turning
the Allen screw in the middle of the base of
dishwasher use an Allen key (Illustration 5A).
To adjust the front feet, use a flat screw driver
and turn the front feet until the dishwasher is level
(Illustration 5B).
-84-
Publicité
