Publicité
Les langues disponibles
Les langues disponibles
5.STARTING A WASHING PROGRAM
Wash Cycle Table
(
)
NOTE:
Means: need to fill rinse into the Rinse-Aid Dispenser.
Cycle Selection
Program
Information
For heaviest soiled
crockery, and normally
Intensive
soiled pots、pans、dishes
etc with dried on soiling.
For normally soiled loads,
such as pots、plates、
Normal
glasses and lightly
soiled pans.
This is standard programme,
it is suitable to clean normally
soiled tableware and it is the
ECO
most efficient programme in
terms of its combined energy
(*EN 5 0242)
and water consumption for
that type of tableware
Rapid
A shorter wash for lightly
soiled loads that do not
need drying.
NOTE:
*EN 5 0242 : This programme is the test cycle. The information for comparability test in accordance with EN
50242, as follows:
Capacity: 10 setting
Position Upper basket: upper wheels on rails
Rinse aid setting: 6
Pl:0.49w; Po:0.45w.
Turning On the Appliance
Starting a cycle wash
1
Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one (see the section entitled
"Loading the Dishwasher").
Description
of Cycle
Prewash(50℃)
Wash(65℃)
Rinse
Rinse
Rinse(65℃)
Drying
Pre-wash(45℃)
Wash (55 ℃)
Rinse
Rinse (65 ℃)
Drying
Prewash
Wash (50 ℃)
Rinse(65℃)
Drying
.
Wash (40 ℃)
Rinse
Rinse (45 ℃)
-71-
Detergent
Running
pre/main
time(min)
3/22g
165
3/22g
175
3/22g
190
20g
30
Energy
Water
Rinse
(Kwh)
(L)
Aid
1.4
16.5
1.1
13
0.74
9
0.7
10
Publicité
