Publicité
Les langues disponibles
Les langues disponibles
Cleaning the Spray Arms
It is necessary to clean the spray arms regularly for hard
water chemicals will clog the spray arm jets and bearings.
To remove the upper spray arm, hold the nut, rotate the arm
clockwise to remove it.
To remove the lower spray arm, pull out the spray arm upward.
Wash the arms in soapy and warm water and use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.
How to Keep Your Dishwasher in Shape
After Every Wash
After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture and
odours are not trapped inside.
Remove the Plug
Before cleaning or performing maintenance, always remove the plug from the socket.
No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of the dishwasher,do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water.To remove spots or stains from the surface of the interior, use a cloth
dampened with water an a little vinegar, or a cleaning product made specifically for dishwashers.
When not in Use for a LongTime
It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug from the socket,
turn off the water supply and leave the door of the appliance slightly open. This will help the door seals to last
longer and prevent odours from forming within the appliance.
Moving the Appliance
If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be positioned
on its back.
Seals
One of the factors that cause odours to form in the dishwasher is food that remains trapped in the seals.
Periodic cleaning with a damp sponge will prevent this from occurring.
-75-
Open
Publicité
