Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. LIGHT BULBS
Make sure power is switched off at service panel before carrying out any operation on the hood.
This range hood requires two UL approved halogen bulbs (JC type, 12 V, 20 W, G4-base), included.
To replace bulbs:
Take care not to damage the hood finish while using the screwdriver.
1. Carfully insert the blade of a small flat blade screwdriver between light cover and rim and
gently pry out light cover from light assembly.
In order to prevent the risk of personal injury, the halogen lamps must cool down
before removing them.
2. Remove light cover from light assembly and set aside.
3. Replace bulb with a new JC type, 12 V, 20 W Max, G-4 base halogen bulb.
Do not touch replacement bulb with bare hands!
4. To reinstall the light cover, insert the 3 light cover tabs in the light assembly slots and gently
push until secure.
!
WARNING
CAUTION
WARNING
!
CAUTION
-8-
HD0399
HD0400
L
A
S
IGHT
SSEMBLY
LOTS
HD0401
Publicité
Chapitres
Table des Matières
