Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. CONNECT WIRING
Risk of electrical shock. Electrical wiring must be done by qualified personnel in accordance with all applicable
codes and standards. Before connecting wires, switch power off at service panel and lock service disconnecting
means to prevent power from being switched on accidentally.
1. Connect cable to range hood wiring using included wire connectors.
Connect BLACK to BLACK, WHITE to WHITE and GREEN or BARE wire to GREEN
wire.
2. Reinstall wiring box cover using both screws previously removed in step 3.1.
3. Reinstall bottom panel using the 7 screws previously removed in step 3.1. Make sure
both grease guides are aligned with the holes.
4. Using long nose pliers, pull out the end of each grease guides (B). Then, set them in
such a way their flange slightly protrudes above the bottom panel surface (C).
5. Slide the main grease cup back in.
!
WARNING
-7-
HE0055
H
OLES
HO0046
B
C
HD0149
HO0172
Publicité
Chapitres
Table des Matières
