Télécharger Imprimer la page

Installation; Prior To Installation; Smoke Outlet; Preparation Before Installation - Jøtul FS 73 Manuel D'installation Et D'utilisation

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 60
of 305°C.
The cross-section of the chimney must be at least that of
the flue pipe. Ø 150 mm/177 cm 2 cross section.
Several solid fuel products can be connected to the same
chimney system if the chimney cross-section is adequate.
Contact your local building authorities regarding restrictions
and installation requirements.
The chimney must be connected in accordance with the
installation instructions of the chimney supplier.
Make sure that the flue pipe rises all the way up to the
chimney.
Please note that it is extremely important for connections
to have a degree of flexibility.
The recommended chimney draught is 16-18 Pa.

4.0 Installation

NB: Before installing the fireplace, check it carefully for any
signs of damage.
NB: The product is heavy! Ask someone to help you when
positioning and installing it.
NB: Read the Installation and Operating Instructions for the
Jøtul I 520 (Cat. no. 10046368) and Jøtul FS 73 (Cat. no.
10046753) carefully before installing the fireplace!
Use the acrylic sealant provided for all joints.

4.1 Prior to installation

The basic product comes in two packages:
1. Burn chamber.
2. Concrete units with mounting sections.
NB: Check the product for signs of damage when you
unpack it.
Preparations
Before installation, it is necessary to decide:
Where the smoke outlet is to be located.
Possible use and location of external air supply.
Refer to manuals for installation of the parts.

Smoke outlet

Before starting installation work, decide whether a rear or top
outlet will be used. The product is delivered from the factory
with the smoke bell positioned for a top outlet. Read the
Installation and Operating Instructions for the Jøtul I 520 (cat.
no. 10046368).

Preparation before installation

Fig. 3
1. For a top outlet: Make holes for outside air connection.
For a rear outlet: Make holes for outside air connection
and rear outlet. Distance from floor to centre smoke outlet
is 1225 mm.
Fig. 4
ENGLISH
Rear
smoke outlet
41

Publicité

loading