Reset; Reset Procedure; Values After Reset - Chauvin Arnoux C 320 Notice De Fonctionnement

English

5.5 RESET

Following a power outage or a magnetic or RF induction event, the memories may
contain incorrect values.
The C 320 must then be reset to operate normally
5.5.1

RESET PROCEDURE:

Press the:
The alphanumeric display indicates:
Then the:
The alphanumeric display indicates:
The C 320 returns to the measurement mode.
Following this reset, all of the adjustments must be redone.
5.5.2

VALUES AFTER RESET:


Automatic range switching

Cell coefficient: 1.00

Coefficient %/°C: 2.2

Manual temperature: 25.0°C

Automatic temperature: no offset.

Recorder output, 0/100 = 200

Recorder output, 100/100 = 1800
44
key
VAL ****
and
VAL *123*
VAL *INIT
Conductimeter C 320
keys