Adjusting Recorder Output; Factory Output Setting; Adjusting The Parameters Of The Analog Output - Chauvin Arnoux C 320 Notice De Fonctionnement

5.3 ADJUSTING RECORDER OUTPUT

The conductivity recorder output is on the rear panel of the instrument:
⊝

Black
The recorder output is inoperative (0V) when the instrument is in the automatic
range switching mode.
5.3.1

FACTORY OUTPUT SETTING

When first used or after a reset:

0% (0V) = 200

100% (5V) = 1800
5.3.2

ADJUSTING THE PARAMETERS OF THE ANALOG OUTPUT

Press the:
The alphanumeric display indicates in turn:
0/100 corresponds to 0V
The numerical display indicates the present setting.
Press the:
To adjust the numerical display to the desired 0/100 value (from 0 to 1999).
Conductimeter C 320
⊕
and red terminals for insulated 4mm banana plugs.
key
SORTIE
ANALOG
0/100
or
English
key.
41