Installation Of Wired Controller; Wiring Work - Gree GMV-ND22T/B-T Manuel D'utilisateur

4.5 Installation of Wired Controller

Wired controller is optional accessory. If wired controller is needed, please contact your local
dealer and install the wired controller according to the instruction manual.
Note!
Do perform the commissioning operation before first use; automatic addressing or other
settings, please refer to the manual of ODU.

5 Wiring Work

Note!
 Units must be grounded securely, or it may cause electric shock.
 Please carefully read the nameplate and the wiring diagram before carry out the wiring
work, incorrect wiring could cause malfunction or even damage the unit.
 The capacity of power supply must be sufficient and the sectional area of wires in the
room should be above 2.5mm2.
 The unit should be powered by independent circuit and specific socket.
 The wiring should be in accordance with related regulations in order to ensure the units
operate reliably.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners Cassette Type Indoor Unit
Fig 4.4.5
14