AL-KO MH 350-4 Mode D'emploi page 25

Guarantee
12 GUARANTEE
We will resolve any material or manufacturing faults on the appliance during the legal warranty period
for claims relating to faults, in accordance with our choice either to repair or replace. The legal warran-
ty period is determined by the legislation of the country in which the appliance was purchased.
Our warranty promise applies only if:
■
These operating instructions are heeded
■
The appliance is handled correctly
■
Original spare parts have been used
The guarantee excludes:
■
Paint damage that can be attributed to normal wear and tear
■
Wear parts that are marked with a frame
■
Internal combustion engines (these are covered by the guarantee provisions of the corresponding
engine manufacturers)
The guarantee period commences with purchase by the first end user. The date on the proof of pur-
chase is decisive. In the event of a guarantee claim, please take this guarantee declaration and the
original proof of purchase, and contact your dealer or the nearest authorised customer service centre.
This statement does not affect the purchaser's statutory claims for defects against the vendor.
13 TRANSLATION OF THE ORIGINAL EU/EC DECLARATION OF CONFORMITY
We hereby declare, as the exclusive responsible party, that this product in its marketed form conforms
to the requirements of the harmonised EU Directives, EU safety standards and the product-specific
standards.
Product
Cultivator
Serial number
G2212215
Type
MH 350-4
MH 350-9 LM
MH 4001 R
Sound power level
EN ISO 3744
measured/guaranteed
MH 350-4: 92 / 93 dB(A)
MH 350-9 LM: 92 / 93 dB(A)
MH 4001 R: 92 / 93 dB(A)
463054_h
The warranty becomes void in the case of:
■
■
■
xxxxxx (x)
Manufacturer
AL-KO Geräte GmbH
Ichenhauser Str. 14
D-89359 Kötz
Germany
EU directives
2006/42/EC
2014/30/EU
2000/14/EC
Conformity evaluation
2000/14/EC Annex VII
Notified body
ORGANISMIO NOTIFICATO SEC-
ONDO
REGGIO EMILA INNOVAZIONE
Soc. Cons. a r.l.
Via Sicilia 31
4112 Reggio Emilia
Italy
No. Instituo 1232
Unauthorised repair attempts
Unauthorised technical modifications
Non-intended use
on the spare parts card
Duly authorised person for
technical file
Andreas Hedrich
Ichenhauser Str. 14
D-89359 Kötz
Germany
Harmonised standards
EN 709:1997+A4:2009
EN ISO 14982:2009
Kötz, 2018-11-23
Dr. Wolfgang Hergeth
Managing Director
25