To ensure your system is safe:
EN
- ensure that an area of at least 50 cm in front of the
appliance is clear of objects which might hinder air
circulation (furniture, armchairs, etc.);
- position a shelf at least 10 cm above the top of your
radiator;
- ensure that the bottom of the junction box is positioned
at least 10 cm above the floor;
- use mounting screws suitable for your wall.
ImPOrTANT This appliance should never be installed
with the electrical connection box positioned topside.
CAUTION:
Always turn off the electricity supply (circuit-breaker +
pilot wire) before making any connections.
30
2.2 Positioning your appliance
To get the most out of your appliance and enjoy the highest standards of comfort,
we recommend that you install the appliance near places with high heat loss (windows,
doors, etc.) wherever possible.
You will find a complete set of assembly instructions in your appliance's box.
rECOmmENDATIONS FOr ThE OPEN WINDOW DETECTION FUNCTION
(SEE ChAPTEr 4.2)
The position of your device affects the way the open window detection function
works. It should be placed as close as possible to the opening part, but should
not be installed near a door.
In addition to the arrangement of your installation in the room, its function is
also affected by the temperature setting on the device, and the outdoor
temperature.
2.3 Connecting the appliance
The technical specifications of your radiator are shown on its nameplate.
Please note these down before installing it and before requesting any after-sales
assistance.
When connecting the appliance to the mains, you must observe:
• the voltage indicated on the nameplate;
• conventional colour coding:
40008126
40008126
IP: protection level of your appliance against the
ingress of solid foreign bodies and water spray
Voltage and power required for installation
Appliance reference number
Class II: double insulated
OF: serial number
Manufacturer code
– blue or grey: neutral
– brown: live
– black: pilot wire
EN
Installing your appliance 31