Stiebel Eltron UFP 5 t LABS Guide Rapide page 2

SUPPLEMENT UFP, CUN, FUN, EUN
Setting a temperature limit
ENGLISH
1. General information
1.1 Relevant appliances
- UFP 5 t LABS
- UFP 5 t + EMW
- UFP 5 t + EMK
- CUN 5
- FUN 5
- EUN 5 2 230
- UFP 5 t + TWS 2
- UFP 5 t SLi
- UFP 5 t
- UFP 5 h + VL
- UFP 5 h
1.2 Relevant documents
Note
Observe the operating and installation instructions pro-
vided with the appliance.
2. Limiting the temperature selection
1 Limiting ring
2 Temperature selector
Placing the limiting ring behind the temperature selector allows
you to limit the setting range of the temperature selector. The
appliance temperature can be limited to either a maximum or
minimum temperature.
2 |303950-80833
The limiting ring has four holes and two end-stops around its
edge. The holes are inscribed with temperature markings. Insert
the limiting ring into the appliance cover so that the spike in the
appliance cover pokes through one of the holes with a tempera-
ture marking. The inscription on the limiting ring must be visible
after insertion.
Setting a maximum temperature limit
 Turn the temperature selector anti-clockwise as far as it will
go.
 Pull off the temperature selector.
 Insert the limiting ring into the appliance cover so that the
spike in the appliance cover pokes through the hole with the
required temperature marking.
 Fit the temperature selector.
The maximum appliance temperature is now limited to the tem-
perature indicated at to the chosen hole.
Setting a minimum temperature limit
 Turn the temperature selector clockwise as far as it will go
(85 °C).
 Pull off the temperature selector.
 Insert the limiting ring into the appliance cover so that the
spike in the appliance cover pokes through the hole with the
55 °C temperature marking.
 Fit the temperature selector.
The minimum appliance temperature is now limited to a low of
65 °C.
1
2
www.stiebel-eltron.com