Beyerdynamic MPC 67 Information De Produit page 8

Additional Functions of the MPC 67 RC
MOSFET-output
Pin 4 is a MOSFET-output for the control of
external devices. When the microphone is activated
the output is low-impedance to chassis (< 25 Ω). AC
and DC signals can be switched, the maximum
current is 100 mA, the maximum voltage is 300 V. If
you want to connect higher loads, this output can
also be used for the control of an additional switch.
External operation
A facility for external operation can be
connected (connection to chassis) to pin 5. All operating
functions can be remotely controlled. The DIP switch
located on the underside of the MPC 67 RC allows you
to select between remote control operation or integral
film switch and remote operation.
Important
To connect the
MPC 67 RC a cable with
the following structure
should be used:
2 wires shielded,
2 control lines,
overall shield.
overall shield 2 control lines
Service
Servicing must be carried out by qualified
service personnel only. Dismantling the microphone
yourself will render the guarantee null and void.
Versions
Model Description . . . . . . . . . . . . . Order #
MPC 67 sw black, with MVK SF/3-C/3
connecting cable. . . . . . . . . . 446.637
MPC 67 RC sw
black, with MVK SF/5-C/5
connecting cable. . . . . . . . . . 446.963
2 wires shielded