Linkoln Electric 125 Serie Manuel D'utilisation page 20

b-11
SETTING uP AND MAKING A ALuMINuM WELD uSING SPOOL GuN
1. Follow the MIG welding steps in the previous sec-
tion.
2. Connect a bottle of 100% Argon shielding Gas per
previous section.
3. Disconnect Magnum 100L Gun.
4. Install optional K2532-1 Magnum 100SG spool gun
per instructions included with gun.
5. Set Gun selector toggle switch to Spool Gun posi-
tion. (See Figure B.20)
FIGuRE b.20
WARNING
6. Turn machine on and make weld per recommended
settings on Procedure Decal inside machine door.
OPERATION
WIRE FEEDER WELDERS (125, 140, 180 MODELS)
b-11