Nilfisk 3707 Manuel D'instructions page 22

3707 - 3907 - 3907 L, M, H - 3907/18 - 3907/18 L, M, H
3707/10 - 3707/10 L, M, H - 3907 W - 3907 W L, M, H
Description of the vacuum cleaner - Labels
A. Identification plate:
Code of the Model which includes the Category of use
(L - M - H), Technical Specifications, Serial Number, CE
marking, Year of manufacture
B. Dust container
C. Fastening latches
D. On-off switch
E. Handle
F. Inlet
G. Inlet plug (only for Class M - H vacuum cleaners)
H. Warning label (only for Class L - M - H vacuum cleaners)
I. Attention plate
Draws the operator's attention to the fact that the filter
must only be shaken when the machine is off (see par.
"Shaking the main filter").
L. Exhaust
M. Panel power plate
Indicates that the panel is powered by the voltage given on
the data plate.
N. Attention plate (voltage)
For this reason, only explicitly authorized personnel must be
allowed access to the panel.
The electrical components must only be accessed after the
power supply has been disconnected by setting main switch "D"
to position -0- (off) and after having removed the plug from the
current socket.
This vacuum cleaner creates a strong air flow which is drawn
in through inlet "F" and blows out through exhaust "L"; after the
hose and tools have been fitted, make sure that the motor turns
in the right direction.
Before turning on the vacuum cleaner, fit the hose into the inlet
and then fit the required tool on to the end part. Refer to the
accessory catalogue or the assistance service, particularly for
vacuum cleaner variant "B1".
Only use genuine antistatic accessories.
The diameters of the authorized hoses are given in the
technical specifications table.
This vacuum cleaner is equipped with an internal deflector
which subjects the vacuumed substances to a circular
centrifugal movement that makes them drop into the container.
The vacuum cleaner is equipped with a main filter which
GB
enables it to be used for the majority of applications.
Different types of main filter are available: standard and class L
and M for dusts that are hazardous for the health.
Besides the main filter which retains the more common types
of dust, the vacuum cleaner can be fitted with a secondary
filter (Hepa H) with a higher filtering capacity for fine dusts and
substances that are hazardous for the health.
C65
Figure 1
Optional kits
Various optional kits are available for converting the vacuum
cleaner:
– level gauge for liquids - stopping liquids;
– removable separator;
– clamp and bracket;
– downstream Hepa filter;
–
grill and depressor;
– grate;
– cartridge filter;
– electric filter shaker;
–
limiting valve.
On request, the vacuum cleaner can be supplied with optional
kits already installed. However, they can also be installed at a
later date.
Please contact the sales network for further details.
Instructions describing how to fit the optional kits and the
relative operation and maintenance manuals are supplied
together with the optional kits themselves.
ATTENTION DANGER!
Only use genuine spare parts.
Accessories
Various accessories are available; refer to the Accessories
Catalogue.
ATTENTION DANGER!
Variant B1: refer to the sales network.
ATTENTION DANGER!
Variants B1 have special safety ports that can only be fitted
with genuine accessories.
Do not tamper with the inlet.
ATTENTION DANGER!
Only use genuine accessories.
4
01/2015