Cristec RCE/100-1E-2IG Manuel Utilisateur page 19

Main precaution
Before handling the RCE isolator, please read carefully
this manual.
.
Precautions regarding electric shocks
Risk of electric shock: it's strictly forbidden to interfere
with isolator when under voltage.
The protections (fuses) will be selected by the installer
according to the risks. Special precautions are
recommended for any installation prone to electrolysis
phenomena.
Precautions regarding overheating of the appliance
This appliance is designed to be mounted on a vertical wall
as indicated herein.
It is imperative have a gap of 100mm around the isolator.
The installer must ensure that the temperature of the air is
lower than 85°C in extreme operating conditions.
Measures should also be taken to allow the evacuation of
hot air on either side of the isolator.
It's strictly forbidden to put any device on, or against the
isolator.
The isolator must not be installed near a heat source; it
should be installed in a well-ventilated area.
Beware ! hot surface: do not touch the isolator
during and after its operation (burning hazard).
18