Software Kit (Optional) - Metrix MX 26 Notice De Fonctionnement

5.

SOFTWARE KIT (optional)

Connection of the kit and installation of the SX-DMM software :
With the software kit option, the multimeter can interface directly with a computer or PC:
1. Connect the optical plug at the top of the shockproof sheath. A mechanical fail-safe
device is provided on the left-hand side to prevent connection the wrong way round.
2. Plug the connector into one of the PC's "COM" ports.
3. Keep the "Pk +/-" and "
from the "OFF" position to the position required.
The digital display briefly indicates "RS232".
RS232
optical connector
Mechanical
fail-safe
device
Multimeter with its sheath
4. Install the SX-DMM software on the PC using the supplied CD.
5. Start up the software to perform data acquisition and to take advantage of the various
display possibilities such as cursors, curves, tables, etc.
24
" multimeter keys pressed down and then move the switch
Plug
COM
RS232
interface
cable
5000-count portable digital multimeter, with current inputs
Chapter II
PC