Table Des Matières - ProMariner ProSportHD6 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Table of Contents
Warranty Information...
Important Charger Operation Note:
Once your new ProSportHD is installed and properly connected to batteries you will be ready to plug it in.
Please note the ProSportHD has a built-in feature that will analyze all battery connections and
batteries to determine that your boat's batteries are capable of being charged correctly. The
analyze mode is automatic and will take place every time the unit is plugged into a GFCI protected
outlet. The self test takes approximately 1 minute to complete.
During the analyze process, the Mode LED will pulse blue. When completed, if everything is
connected properly, the batteries are OK and above 2.5 VDC then the charger will register and
illuminate the green System Check OK indicator followed by a solid red or green Mode LED
indicating all batteries are being charged or maintained.
If the System Check OK indicator does not illuminate solid green after 1 minute,
check the following:
- poor connection
- blown DC cable fuse
- reverse polarity
- wired across 2 batteries
- battery is below 2.5V
In any of the above cases, refer to the troubleshooting section on page 27 of this manual.
Table of Contents
1
2-7
8
9-14
15-17
18-24
25
26
27
28

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Prosporthd8Prosporthd10 oeProsporthd12Prosporthd15 oeProsporthd20Prosporthd20plus ... Afficher tout

Table des Matières