ProMariner ProSportHD6 Manuel D'utilisation page 12

Installation
19
Typical Wiring
Fig. 2 ProSportHD Three Bank Charger for 3 12V Batteries
24 VDC Trolling Motor or House Battery Configuration with (2) 12 VDC Batteries
Connected with a Series Jumper Plus Dedicated 12 VDC Engine Start Battery
Note:
Indicates Jumper Series
Indicates Fuse
ProSportHD 3 Bank
For Engine Battery use
this Bank Cable Only
Cable 3
_
Bat 3
+ +
12 VDC Engine Two 12 VDC Batteries connected with a
Crank Battery series jumper for a 24 VDC Trolling Motor
Cable 2 Cable 1
Top View
_ _
Bat 2 Bat 1
of Battery
+
Typical Wiring
Fig. 3 ProSportHD Three Bank Charger for 3 12V Batteries
Dedicated 36 VDC Trolling Motor Battery Configuration with (3) 12 VDC Batteries
Connected with (2) Series Jumpers
Note:
Indicates Jumper Series
Indicates Fuse
ProSportHD 3 Bank
For Engine Battery use
this Bank Cable Only
Cable 3
_
Bat 3 Bat 2
+ +
Three 12 VDC Batteries connected with a (2)
series jumper for a 36 VDC Trolling Motor
DANGER: RISK OF ELECTRIC SHOCK.
Do not touch uninsulated portion of output connector or uninsulated battery terminal
if 3 or more batteries are connected in series.
Installation
Cable 2 Cable 1
Top View
_ _
Bat 1
of Battery
+
20