Irrigation - CAME TS07 Manuel Utilisateur

Irrigation sectors
Garden
Hedge
06:13
Wednesday 01 March 2017
1
Select the days you want the irrigation
program to run .
Manual activation of the sector irrigation
program .
Once the sector irrigation parameters have
been configured, this cursor lets you change
the programmed percentage irrigation time, to
adapt to the seasonal weather conditions .
A
Home Back
Sector configuration
Mon Tue Wed Thu Fri
Garden
SEASONAL PERCENTAGE
06:13
Wednesday 01 March 2017
2

Irrigation

During programming, the installer divided up the irrigation system into sectors which contain
the irrigators .
The sectors are irrigated according to a timed sequence of activations of the single irrigators,
run cyclically (irrigation cycle) .
Activation of each individual irrigator can be personalised to ensure optimal, uniform irrigation
without wasting water .
Programmed irrigation for the sector in progress .
The selection switches A can be used to activate/deactivate the irrigation program for the
sector .
Manual irrigation for the sector in progress .
☞ The subdivision and the corresponding name assigned to the irrigation sectors and
single irrigators are pre-set during system programming. They cannot be modified by
the user.
Settings
Sat Sun START TIME
STOP TIME
Home Back
Days of the week; green highlighting shows
the current day of the week
Press this area to set the start time of the
sector irrigation program .
The irrigation program end time is calculated
by the system on the basis of the programming
of the single sprinklers and the set seasonal
percentage .
Button to access the programming window for the
single sector sprinklers .
Settings
Contents