Sip Settings (Administrator Password Required) - CAME TS07 Manuel Utilisateur

Contents
SIP Settings
Username 00401200001
Password
Display name
Server address 192.168.71.240
Server type
XIP Server
06:13
Wednesday 01 March 2017
Generic None
Save
Home Back Settings
SIP settings
(administrator password required)
A
[Username]
In this space enter the "SIP User Name" assigned to the device by PCS Xip .
[Password] (absent by default)
In this space enter the password assigned in the Xip receiver credentials in the
server set-up window .
[Name Displayed] (only for systems with no XIP Server)
In this space enter the name that you want to give to the device .
[Server address]
In this space enter the server's IP address .
Default IP addresses of Xip servers:
ETI/MiniSER Xip - 192 .168 .0 .3 (port 0) - 192 .168 .1 .3 (port 1)
ETI/SER Xip, 192 .168 .1 .1
[Server type]
Choose the type of server the device is connected to from:
[XIP Server] - XIP-type server,
[Generic] - Non-Xip server,
[None] - If no server is present
Save the settings by tapping Save .
If all the operations have been carried out correctly and if the SIP server is on, an
icon A will be visible on the home page and on all the pages where it features,
which indicates that the device has been registered with the server .
The lists of the entry panels and receivers present on the network, which the
device can communicate with, will be populated automatically by the server .
Press the Back button to go back to the list of parameters to set .