Timers; Programming A Timer Setting - CAME TS07 Manuel Utilisateur

Contents

Timers

Driveway light
Garden lights
06:13
Wednesday 01 March 2017
1
Driveway light: configuration
Mon Tues
D
06:13
Wednesday 01 March 2017
2
A
Home Back
B
Wed Thurs Fri Sat Sun
Home Back
Timers
Some of the system's devices may be controlled by timers that allow them to be
programmed for activation on certain days and in certain time slots
The devices are matched with a timer during system programming.
☞
Using control A you can activate or deactivate the timing programmed .
Select one of the timed devices to access the configuration window .
Settings

Programming a timer setting

Select the days of the week B during which the timer setting will be applied .
Tap one of the buttons C to program the device's four possible timer setting time
slots .
A pop-up is displayed via which you can set the start and end time of the timer
setting in the selected time slot; there is also a button for disabling the time slot .
D Timer setting in progress .
C
☞ It is also possible to program just one timer setting slot.
The programmed timer setting is effective only if command A is in the ON
position.
Settings