CAME TS07 Manuel Utilisateur page 77

Lights
A
Ground floor
A
First floor
06:13
Wednesday 01 March 2017
1
Lights
A
Ground floor
C Living room
Living room floor lamp
A
Ground-floor bathroom
Ground-floor bathroom light
C
First floor
06:13
Wednesday 01 March 2017
2
B
Home Back Settings
B
D
Home Back Settings
Lights
During system programming, the environment is divided up into Zones and
Spaces .
A Zone: A zone is usually a collection of spaces, e .g . first floor, living area,
garden, relaxation space, etc .
The number on the right-hand side of the screen B shows how many light points
are turned on in the Zone.
C Space: A space is usually a room or a specific area of the home, e .g .
entrance, swimming pool, driveway, etc .
The number on the right-hand side of the screen D shows how many light points
are turned on in the Space.
Note:
The division and the corresponding name assigned to the Zones or Spaces in the
environment can be set during system programming. They cannot be modified by
the user.
The list of light points and their status can be consulted in the spaces .
The light points can be turned on or off using the relevant command .
Type of light point Turned on
ON/OFF
Dimmable
RGB
Tap the icon for a dimmable or RGB light point to access the control window for
that light point .
Contents
Turned off