Publicité
Les langues disponibles
Les langues disponibles
RC 4 - User Remote
Description
The RC 4 user remote control gives the occu-
pant the ability to turn lighting 'ON' or 'OFF'
with the entire line of Control Pro sensors via
remote control. The dimming functions are on-
ly available with the DIM-24 sensors. Each val-
id press of a button is indicated by a blue LED
ash on the sensor.
R Quattro COM-WR_USA_03-07-13_ENU-FRA.indd 24
Functions
Dimming function
The RC 4 remote enables the user
1
to dim up or down to desired lev-
els when used with the Control
Pro DIM-24 sensors and 0-10 volt
dimming ballasts. The last light
level adjustment setting is saved
and will return after being
switched 'OFF' and then back 'ON'
again by the RC 4, switch or pres-
ence detection.
Light 'ON'/ 'OFF'
The ON/OFF remote feature al-
2
lows the occupant to convenient-
ly turn lighting OFF and ON again
such as needed during video or
presentation viewing. Controls
1
only lighting and does not e ect
HVAC outputs of the COM2-24.
The ON/OFF function works with
all of the Control Pro sensors.
Reset
2
Returns settings to those selected
3
manually on the detector or to
the factory setting (only applies
to settings that can be changed
by remote control)
3
- 24 -
04.07.13 14:
Publicité
