gdw 1513 Mode D'emploi page 7

Trekhaken
Bouten - Boulons - Bolts - Bolzen
Kwaliteit 8.8
M6 10,8Nm of 1,1kgm
M12 88,3Nm of 9,0kgm
Bouten - Boulons - Bolts - Bolzen
Kwaliteit 10.9
M6 13,7Nm of 1,4kgm
M12 122,6Nm of 12,5kgm
Attelages
Uitsnijding bumper :
Découpe pare-chocs :
Excision bumper :
Ausschnitzung Stoßstange :
M8 25,5Nm of 2,60kgm
M14 137Nm of 14,0kgm
M8 35,3Nm of 3,6kgm
M14 194Nm of 19,8kgm
Anhängevorrichtungen Tow bars
het gearceerde gebied moet weggesneden worden
"B" = de bumper
"O" = de onderrand van de bumper
"M" = het midden van de bumper
la zone hachurée doît être découpée
"B" = le pare-chocs
"O" = le bord inférieur du pare-chocs
"M" = le milieu du pare-chocs
the hatched area has to be cut away
"B" = the bumper
"O" = the lower rim of the bumper
"M" = the middle of the bumper
das schraffierte Gebiet muß weggeschnitten werden
"B" = Stoßstange
"O" = Unterrand Stoßstange
"M" = der Mitter von Stoßstange
DIN 912 - DIN 931 - DIN 933 - DIN 7991
M10
M16
DIN 912 - DIN 931 - DIN 933 - DIN 7991
M10
M16
52,0Nm of 5,30kgm
211,0Nm of 21,5kgm
70,6Nm of 7,20kgm
299,2Nm of 30,5kgm