Table des Matières
Publicité
FOM 330
Deutsch
Quick oil settings
With this function all relevant settings of
an oil can be made fast and comforta-
ble.
Start the quick oil settings by holding the
UP-button for 5 seconds. The options
will be shown one after another. Switch-
ing back is not possible, but you can exit
any time with the ON/OFF-button.
Basic settings of fresh oil: FRPC
This setting should be the TPM-value of
the fresh oil. Adjust with UP/DOWN,
next with MENU.
OFFSET-correction: OFSET
The desired offset. Adjust with
UP/DOWN, next with MENU.
GAIN-correction: GAIN
The desired gain. Adjust with
UP/DOWN, next with MENU.
Limit for yellow signal light: LIM 1
The limit value between fresh and
medium quality oil. Adjust with UP/
DOWN, next with MENU.
Limit for red signal light: LIM 2
The limit value between medium quality
oil and old oil. Adjust with UP/DOWN,
finish the quick oil settings with MENU.
You get back to the measurement
mode.
28
Bedienungsanleitung
Publicité
Table des Matières
