Cleaning The Instrument - TESTO 175 Mode D'emploi

7 Maintaining the product
The data logger needs to be reconfigured. For
this purpose the software testo Comfort Software
must be installed on the computer and a
connection to the data logger must be set up.
9. Connect the data logger to the PC with a USB cable.
10. Start the software testo Comfort Software and set up a
connection to the data logger.
11. Reconfigure the data logger or load the old, saved
configuration, see separate operating instructions testo
Comfort Software.
- The data logger is once again ready for use.
7.2.

Cleaning the instrument

CAUTION
Damage to the sensor!
> Ensure that no liquid enters the inside of the
housing.
> If the housing of the instrument is dirty, clean it with a
damp cloth.
Do not use any aggressive cleaning agents or solvents!
Weak household cleaning agents or soap suds can be
used.
54