Display And Control Elements; Display - TESTO 175 Mode D'emploi

5 Display and control elements

5. Plug the USB cable into the Mini USB port (1).
6. Configure the data logger, see separate operating
instructions testo Comfort Software.
5 Display and control
elements
5.1.

Display

The display function can be switched on/off via
the software testo Comfort Software.
Depending on the operating status, various
information may be shown in the display. A
detailed representation of the information that
can be called up can be found under Menu
overview.
For technical reasons the display speed of liquid
crystal displays becomes slower at temperatures
below 0 °C (approx. 2 seconds at -10 °C,
approx. 6 seconds at -20 °C). This has no
influence on the measuring accuracy.
testo 175 T1
41