• Use the power adaptor indoor only.
• Do not place any object on top of charger or on a surface that might block the ventilation
slots and result in excessive internal heat. Place the charger in position away from any heat
source.
• Do not disassemble charger. Take it to authorized service center when service or repair is
required. Incorrect reassemble may result in a risk of electric shock or fire.
• Perform charging in ambient environment (+4 °C to +40 °C)
Battery pack
• Charge the battery pack with the provided charger only.
• Do not incinerate the battery even if it is severely damaged or is completely worn out. The
battery can explode in fire.
• Leakage of liquid from the battery cells may occur under extreme usage or temperature
conditions.
• Do not connect the positive and negative terminals with metal objects. Battery could be
short-circuited and resulted in battery damage or fire.
3.3- Special warnings when using this product
• WARNING! Risk of cut. Keep your free hand or any body parts away from the blades,
especially when the product installed with battery.
• Use personal protective equipment. Always wear safety goggles, earmuffs, dust mask, non-
skid safety shoes and safety gloves when using the tool.
• Avoid unintentional starting. Do not carry this product with finger on trigger.
• Do not use the tools in any operations that beyond the intended purpose.
• If blade jamed on branch while cutting, immediately release trigger to prevent damage to the
motor, then clear the jam.
• Maintain tool with care, keep the blades sharp, clean and well installed. Check the blade
before operation.
• Remove blade cover before use. Restore the balde cover after use.
• Never use the lawn shear near power lines, fencing, posts, buildings, or other immovable
objects.
IV. GETTING STARTED
4.1- Unpacking
• Remove the product from packaging.
• Check if the product and accessories (if any) are intact.
4.2- Content
• 1 machine body
• 1 battery pack
• 1 battery charger
• 1 trimmer blade with protective cover
• 1 shear blade with protective cover
• 1 instruction manual
4.3- Assembly
No assembly or adjustment is required by the user.
Page 12 / 25