NSK Ti-Max X95EX Manuel D'utilisation page 4

WARNING
• Immediately after a treatment, the handpiece should be cleaned, lubricated and sterilized. Failure to properly maintain the
handpiece may lead to overheating, causing burn injuries or product failure. (Refer to "8. Post-use Maintenance")
• If blood infiltrates inside a handpiece, an automatic handpiece cleaning and lubrication system may not totally clean the
internal handpiece components, which may lead to internal blood coagulation. Coagulated blood inside the handpiece may
cause handpiece failure and overheating, causing burn injuries. To avoid the risk, NSK recommends to immediately lubricate
those handpieces with PANA SPRAY Plus / PANA SPRAY.
• Depressing the Push Button while the handpiece is in rotation may lead to overheating, causing burn injuries or product
failure. Avoid the push button to contact with any oral tissue.
• Supply coolant water and coolant air while using the handpiece. No supplying the coolant water and coolant air may lead to
overheating, causing burn injuries or product failure.
• Do not use the handpiece for polishing purposes. Polishing paste could enter the handpiece, causing the failure of the Push
Button or burn injuries due to the overheating of the handpiece head.
• Keep any debris or other foreign materials away from inside the gear or the handpiece. Foreign materials remaining inside
may lead to overheating, causing burn injuries or other accidents.
2