NSK Ti-Max X95EX Manuel D'utilisation page 10

5. Mounting and Removing the Bur
5-1 Mounting the Bur
1) Insert the bur into the chuck.
2) Depress the Push Button to open the chuck (
3) Insert the bur fully into the chuck until it stops (
4) Confirm that the bur is not removed by gently pulling and pushing the bur without depressing the
Push Button.
NOTICE
• Grip the handpiece while placing your thumb tip on the Push button which makes it easier to depress the button.
8
).
) then release the Push Button.
Fig. 2